working 3am-3pm sucks so sorry for the delay.
I did a write entire with your file and add the stft and ltft for both banks in the scanner config. This file has a start or two and a few low rpm revs. It, from what I can tell with the stft and ltft, is trying to pull 12-18% fueling out of it. In my other truck I plot the WB feedback in lambda to a chart with the same column and row labels as the main ve table in the tune to adjust the cells needing correction.
I am looking for a pdf around here that told me what to plot in the same manner to know where to multiply by 1/2 but being this far out could probably be safe with a full to get closer.
I appreciate the help. I am actuallu off of work this weekend so this is my goal from now till saturday is to get this thing out of here.
The wife will be happy.
Thanks
Steve
Add the file goober.....
2000 53 to 60 1st write adjustments from techhelp sd enhanced Logfile starts revs.hpl