Page 3 of 3 FirstFirst 123
Results 41 to 42 of 42

Thread: Summit 8701r1 gen 3 cam tune

  1. #41
    Potential Tuner
    Join Date
    Nov 2022
    Posts
    7
    Gotcha. So with that said i did finally get around to log iac counts and zeroing the tps% and after a little bit of logging and some small adjustments to BAF table i finally got that nasty hole out. But only to get a real nice stumble off idle.
    Im really ready to set this turd on fire. Anyone got match's cuz i got some gas. I'm guessing now that i got idle pretty good VE is gone need re-adjusting. Quick question? Whats a good number on the IAC step's during in gear idle? I'm seeing
    in the neighborhood of 150. But get's down to 0'ish idling in park.

  2. #42
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    1,627
    Quote Originally Posted by InandOut View Post
    Quick question? Whats a good number on the IAC step's during in gear idle? I'm seeing
    in the neighborhood of 150. But get's down to 0'ish idling in park.
    That sounds like the converter is too tight.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=edcmat-l1@msn.com