Hi All,
I need some help.
I have a 3.6 HFV6 enigne from a Pontiac G6 in an MGB using an E67 controller configured as a Pontiac G6.
I can't get it to start. I believe it's a VATS issue as I do not seem to have any injector pulses. I received a cal from Steve at EFIHarnesses that I thought would help and in fact the engine tried to start once but since then, and without any changes, refuses to do so.
The VATS patches are disabled as are the immobilizer DTCs.
I don't have any trouble codes.
Fuel Pressure is good.
Any ideas?