nag1 tcc never locks

[239Ram1500]

while data logging my tcc is very rarely applied usually its in slip or unlocked. the tcc locked is always set at no and tcc unlocked is sometimes set at yes but mostly set to no. any help to get my tcc to lock
??

[TransGo Robert]

while data logging my tcc is very rarely applied usually its in slip or unlocked. the tcc locked is always set at no and tcc unlocked is sometimes set at yes but mostly set to no. any help to get my tcc to lock
??

Best to post a log for us to look at.

[239Ram1500]

Best to post a log for us to look at.

v14.hpl here you go

[TransGo Robert]

v14.hpl here you go

It is doing what it is asked to do, technically there is nothing to fix there. The Slip is never commanded to go to zero that's why the TCC unlocked PID reads NO. That's normal, but probably can be modified in the tune if you wanted it to fully lock. Unfortunately I don't know enough about that side to help. But right now, the transmsision in that log is operating as it should and like all those run with factory programing.

[DodgeBoy_8HP]

v14.hpl here you go

Could you also share the tune?

[239Ram1500]

300v16testv2.hpt300v16testv2.hpt

[DodgeBoy_8HP]

300v16testv2.hpt300v16testv2.hpt

You share two of the same tune files... missing the log

[239Ram1500]

You share two of the same tune files... missing the log

which one