I have a gold blade tb 19420707 on my 2010 Suburban 5.3 and have a issues with the idle randomly bouncing around. It's usually just 100 rpms or so enough to hear it. I've change the Idle ETC Area Scalar from a 10 vette with a 6.2
I have a gold blade tb 19420707 on my 2010 Suburban 5.3 and have a issues with the idle randomly bouncing around. It's usually just 100 rpms or so enough to hear it. I've change the Idle ETC Area Scalar from a 10 vette with a 6.2
Last edited by grandamle91; 10-05-2023 at 01:27 PM.
Might wanna try swapping over the idle rpm PIDs from a Corvette or Camaro.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
they are the same
Screenshot (4).png
I see it looks like you copied over a Vette file. If you compare to a Camaro, there are several tables that are different. One of my 2010 Vette files there were 1 or 2 different so I pulled one of the HPT repository and it looks like you copied that file over.
I'd suggest maybe going back to your stock PIDs and see how it acts. It might work fine just setting the scalar.
Another thing is, you softened up the idle spark control over/under tables. When you do that, it throws more of that responsibility back on the throttle blade. Might want to put those back to stock.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
I'll try it again, it was worse with the stock lc9 pids, the under over weren't changed
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
Sure does look like they were changed last night around 8 pm.
Actually they've been changed at least a couple times in just the past couple days.
Last edited by edcmat-l1; 10-04-2023 at 12:43 PM.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
I thought I switched it back to stock. Got that changed back, no difference. Only way I got it to idle smoothly was dropping the idle spark down to 13, but still randomly start to struggle to find a steady state
Last edited by grandamle91; 10-05-2023 at 01:28 PM.
You or somebody has made extensive changes to the entire calibration. The only thing you posted about in your original post is that you have a gold blade LS3 throttle body. That's an insane amount of changes for a throttle body.
Without knowing the rest of the build it's difficult to say what you got going on. It leads me to believe you're just too far "out in the weeds".
Softening up the spark over/under tables will net a smoother idle, especially if you have a cam with some overlap. The side effect being the throttle then thinks it needs to move more to control your idle. Making the over/under tables more aggressive, or leaving them stock as opposed to softening them, will make the idle more choppy but it'll keep the blade from trying to control idle speed, and ending up with the condition you're in. Pick your poison.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
guess im going back to the lc9 tb. idle fine on that
I'd put everything back to stock and then try it with the throttle body. You normally don't have to make many changes for it at all. Can get by with a scalar adjustment only.
Tuner at PCMofnc.com
Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs
It's as stock as it can go
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
Don't know how any stocker it can get, but ok
2010 Chevy Suburban 5.3 12636005 e85 Trans Tuned.hpt
Last edited by grandamle91; 10-05-2023 at 01:36 PM.
Judging by the change log you just put it back to stock before posting it.
Where is the data log of it doing the same thing with it all put back to stock? At this point even if you posted one, I'd find it hard to believe you.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
Then stop replying, I already said I figured it out. It didn't like the stock timing at 20. Doesn't hunt with it set at 13
No Longer Responding. I remember why I stopped coming to this forum.
idle 10 timing.hpl
idle 20 timing.hpl
idle 10 timing.hpt
.........
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]