2017 Ford F150 5.0 with 2018 Mustang GT intake manifold

[chuckk]

Hello,

Browsing the tune repo I did not find any 2018 Mustang GT calibrations that I could use to run this intake manifold. I have purchased a kit from VMP so it's a plug in solution but looking for a stock 2018 Mustang GT calibration.

Thank you !

https://oztuning.com/product/vmp-ina015/

[Modern Muscle]

Hello Chuck,
I have the same intake on my 2017 F150. I have the IMRC deleted and everything in the tune set to open IMRC. I lost some low end torque, but upper RPM gains more than made up for it. I heard it is extremely hard to get the newer IMRC to work on the Gen2 trucks and not worth the hassle. My truck drives well without them and pulls hard up top.

[chuckk]

Yes I would like to keep using it as it is not deleted. Thanks for the help !

[veeefour]

Actually its very easy to make newer IMRC to work. You need some wiring changes tho.

I can help you with that, msg me directly should you be interested.

[chuckk]

Hey thanks for the reply. I?m mostly looking for a stock tune file as I have purchased the wiring adapters to make it work.

[veeefour]

Everything is here to find if you want to DIY, this was posted many times. If you want a startup tune hit me up.

[Pistol_91]

2020 and 2019 stock tunes. 2020 is mine and 2019 i got off here some time ago, looks stock from a quick glance. They should be close to a 2018 but not exactly sure. Maybe someone will confirm
My 2020 GT Stock Tune.hpt
Stock 2019 GT.hpt

[chuckk]

Thank you !