Ok, I have a mild build here. It's a 392 car with a big cam, e85, injectors, fore fuel system... blah blah blah. Puts down about 550 na wheel. I have a trans tune from a "Mopar Tuner" that does diablo, and i've heard not great things about the tunes he normally provides. It was ok in stock form, but now that I spray about a 200 shot (winmax pro controller) its bringing me up to the 700whp range. I desperately need to re tune the trans.
Just had the dealer re-flash to stock (to avoid any boot-loader issues or bricking going to HP), and I'm upping my shift schedule which isn't too complicated. The 4-3; 3-2 downshifts were terrible... ie at a stop and still in 4th. I can handle that.
But pressures, I want to get firmer shifts all around. What do I need to adjust? I've got a compare file from several different cars (HC and demon) and they make sense to a point. I just don't know what I should change and what to not touch.
Yes I have read and searched. The huge sticky and others have been helpful, but for some reason I am not 100% confident still.
Also, Yes I have a tuner I talk to him at least weekly. He is just freaking busy asf and since he is a friend I'm not going to annoy him for my issues. I come from a time of learn and do yourself. THe 2 files I have attached are the last read of the "Diablo" tune and the Current from today that's a fresh dealer flash.
Suggestions or directions are so amazingly appreciated. Thank you all.