What are you guys messing with to get these things to chop decent with a cam? I've been messing with the idle torque spark Proportional table and lowering the idle and this cam still doesn't chop much. Stage 3 TSP cam.
What are you guys messing with to get these things to chop decent with a cam? I've been messing with the idle torque spark Proportional table and lowering the idle and this cam still doesn't chop much. Stage 3 TSP cam.
Post your tune. Ill see what I can do for you.
2016 Ram CCSB Forged NA 396ci Stroker
+2.5cc Flat/Dome Mahle Power-Pak Forged Pistons w/13.2/1 CR on E85
Forged Manley 4.05" Stroke Crank/Speed Master Valvetrain
Race Ported Eagles/Titanium 2.12"/Titanium 1.62" Valves
Custom Cam 235/249 .629/.629 111LSA 110ICL+1Adv
Ported Holley Hi-Ram Intake/NXpress Hi-Ram NO2 Plate kit w/250 Shot(4 sec)
Tx Spd 2" Long Tubes/Active Viper Hood/2-Step
ATI SD w/15% UD/Dual 450 Pumps/Fuel Cell in Bed/Demon 700cc Inj
3800 stall/Det Tru-Trac/410 Gears
Originally Posted by Spray-Cam Hell-Ram
FRANK.BROWN.SRTJEEP.STAGE3CAM.010.hpt
Reply With Quote