TCM Data no visible, do I need license how to do it?
Hello Guys,
New to the tuning of automatic TCM, I have been looking at the GPEC 2A tuning and engine side, but recently wanted to dig into the TCM, I noticed that for the cars I have purchased 2 credits (Jeep JL Wrangler), I dont see enough information on it. (refer to this photo) No TCM data.png
While in I should see TCM set points and other information as per the below photo.
I usually purchase 2 credits and I am able to see all engine related parts but on TCM never able to see all these details. How can I see this to be able to tune the TCM, can anyone help me here please in case I need to add more credits, which type of credits for my MVI3 device and how to be able to see the TCM data?
Yes, I read lots of auto cars, only the capture I shared by mistake is coming from my manual Wrangler 2018+. All these cars I am referring to are 2018+. I use a cable for bypassing the security gateway of jeep JL, as mentioned I can see all the car fuctions, engine tune read and write tunes. Do I still need to get the cable you mentioned while I use this one? jeep jl bypass cable.png
Can you guide me a bit with few photos on how to see the transmission part from special functions and how to buy credits if I already see the car engine details? If there is no issue in that