Hey guys, so I've got a 2006 Audi A3 2.0FSI with a bosch MED9.1 ecu and VCM editor is missing some parameters, such as HPFP displacement and Swirl Control Valve Equipped. I have a file from a 2007 Audi A4 2.0fsi with a MED9.1 ecu and it was them, I'm wondering if I have something set up wrong with my HP Tuners account with parameter access or if this is something I have to contact HP Tuners about. I've attached the 2 files so you can see what I'm talking about.
Those two ECU's may seem "Identical" when looking at them from a name point of view, however the Software ID's are different, the best thing I would recommend is open a ticket with HPT and keep up on them about updating it
Reply With Quote
