2007 surburban

[[email protected]]

i have 2007 suburban with a HP tune in it,the computer went bad replacing it with new flagship one plug and play. can i pull my tune off with hp tuner and reload it into the new computer

[gtstorey]

You will want to copy the changes from the old tune to the new tune read from the new ECM. The write calibration back to the ECM.

[[email protected]]

So are you able to help me program as well

[gtstorey]

So are you able to help me program as well

No

[Bill@HPTuners]

we would NOT recommend flashing a file from one ecm to a different ecm, you do so at your own risk.

[[email protected]]

What your recommendation after install my new ecm

[5FDP]

If your computer went bad, how do you plan to read the tune off it?

A bad computer isn't going to let you read it 99% of the time.

You can install your new computer and start tuning it yourself.

[gtstorey]

If your computer went bad, how do you plan to read the tune off it?

A bad computer isn't going to let you read it 99% of the time.

You can install your new computer and start tuning it yourself.

Could have been something like loosing a ground on a sensor or O2 heater.

[[email protected]]

well im getting transmission code low circuit low solenoid, discover problem in ecm vehicle still drive able just has transmission code

[[email protected]]

when you say tune myself i have hp tuner but very little experience

[gtstorey]

Sounds doubtful that you have a bad ECM. If it is, sounds like it’s probably still readable.

[Bill@HPTuners]

read new ecm, license, & tune away using the file you read and licensed from the new ecm. This is also outlined in the help file.