Originally Posted by
Wieler22
Hey guys, new to the forum here. I have a 2021 Canam 1000 Outlander XMR that has major issues with cold starting. The machine will start and run for a few seconds then die, it will continue doing this unless i give it some throttle and hold it there at about 2000RPM for a minute or so until the engine has some heat, then it will idle on its own at 1250RPM. The colder the ambient air temperature, the harder it is to start and stay running. Wondering if anyone has played with this tuning or could steer me in the right direction on which category/section to start with? Any help would be appreciated, Thanks