Looking for a 2021+ F150 Roush Calibration

[M3T1]

Does anyone have the off-the-shelf Roush calibration for a 2021+ F150?

[justhereforinfo]

Does anyone have the off-the-shelf Roush calibration for a 2021+ F150?

The 2021+ seems to be illusive. There isn't even a stock read in the Repository. Much less a roush cal.

I've got a a 2024 F150 on order and I was looking for the stock 2023 file hoping it would be similar and I could get familiar with it, but I haven't found any files or anyone willing to share their stock read. My guess is, since you need the MG1 pcm service it will limit the number of peeps that actually have their files, and learn to tune these themselves.

[M3T1]

Yup it does need the PCM service. I'm going to send mine out soon, and I'm happy to provide a stock read to the repo. Worst case, I'll have the dealer flash the Roush tune when I buy the blower kit, and then I'll read it and post that too.

[andyb756]

I have a 23 with a roush supercharger and an unlocked pcm I can share the file. Could you share your stock 23 file?

[M3T1]

I have a 23 with a roush supercharger and an unlocked pcm I can share the file. Could you share your stock 23 file?

Once I send my PCM out, I will surely post it. It's gonna be a few weeks because I can't afford to have the truck down currently.

[Mxgforce1]

I have a 23 with a roush supercharger and an unlocked pcm I can share the file. Could you share your stock 23 file?

Could you share the file by any chance? got a 23 Roush im about to do

[M3T1]

I have a 23 with a roush supercharger and an unlocked pcm I can share the file. Could you share your stock 23 file?

I just sent my PCM out this week. I should have it back next week, and I will post the stock file. Can you share that Roush file for myself and the person who commented above who is about to do the blower as well? I will post my stock file as soon as I have my PCM back. Tracking says it is out for delivery at HP Tuners today.

[M3T1]

Hey all. I just got my PCM back. Here is the stock calibration! The truck is a 2021 F-150 with a Coyote.

Stock.hpt

[Justinjor]

Don't expect the 24 F150s to be tunable anytime soon

[M3T1]

Don't expect the 24 F150s to be tunable anytime soon

Well my truck is a 2021, and I'm looking for a Roush calibration file still. I know someone else commented about a 2024, but that's not why I started this thread.

[Justinjor]

Well my truck is a 2021, and I'm looking for a Roush calibration file still. I know someone else commented about a 2024, but that's not why I started this thread.

ya my fault. I read the wrong reply.

I have a 21+ whipple base but not a roush.

[veeefour]

Roush does not support any 24 F150 or Mustang.

But we do.

[M3T1]

ya my fault. I read the wrong reply.

I have a 21+ whipple base but not a roush.

That would still be helpful because I could start from those speed density tables and dial it in from there. If you don't mind posting that file

[M3T1]

Roush does not support any 24 F150 or Mustang.

But we do.

I'm not looking for help with a 24. My F-150 is a 2021.

[veeefour]

I'm not looking for help with a 24. My F-150 is a 2021.

well what im trying to tell you is you wont get any +23 roush files as they wont support anything over 23

[M3T1]

well what im trying to tell you is you wont get any +23 roush files as they wont support anything over 23

That is not relevant to this thread. I'm looking for a 21-23 Roush file...

[veeefour]

That is not relevant to this thread. I'm looking for a 21-23 Roush file...

18 was different, 19 was different and 20 was but later 21 up was ALL the same up to 23 so good luck LOL

[M3T1]

18 was different, 19 was different and 20 was but later 21 up was ALL the same up to 23 so good luck LOL

Right, and Roush sells a kit with a calibration for 21-23 models...