GM E-39 capable stand alone engine harness

[zcarmike]

Does anyone know of a company that makes a stand alone engine harness for the GM 3.6 DI engine and connects to the E-39 ECU.

Thanks
Mike

[TheMechanic]

Give these guys a call.
https://bp-automotive.com/contact/

[zcarmike]

Thanks for the info

[fixbroke]

I'm using this one: https://exomotive.com/store/exocet-l...iring-harness/

...but if I was to do it again I would have just saved the $1100 and modified my donor harness.

[zcarmike]

I'm using this one: https://exomotive.com/store/exocet-l...iring-harness/

...but if I was to do it again I would have just saved the $1100 and modified my donor harness.

Did you have any problems with the exomotive harness? Do you know of someone that can modify the factory harness?

[fixbroke]

It's actually a V8 Roadsters part, but it looks like they don't list it on their site any more. They might still offer it if you contact them, however.

I found that some of the wire lengths were a tiny bit short as compared to my factory harness, necessitating some minor routing changes, but no big deal. The odd thing is that it's just a modified OEM harness so I'm not sure why the lengths would be off.

I don't know exactly what would be needed for the modification, but I'm sure that if you had a little bit of know-how and a wiring diagram then it wouldn't be too hard. The V8R harness included a small fuse and relay box, but it's otherwise just a factory harness.

[Wayne Presley]

I can make them, I've done three so far for the E39.