Does anyone know of a company that makes a stand alone engine harness for the GM 3.6 DI engine and connects to the E-39 ECU.
Thanks
Mike
Does anyone know of a company that makes a stand alone engine harness for the GM 3.6 DI engine and connects to the E-39 ECU.
Thanks
Mike
Give these guys a call.
https://bp-automotive.com/contact/
Thanks for the info
I'm using this one: https://exomotive.com/store/exocet-l...iring-harness/
...but if I was to do it again I would have just saved the $1100 and modified my donor harness.
It's actually a V8 Roadsters part, but it looks like they don't list it on their site any more. They might still offer it if you contact them, however.
I found that some of the wire lengths were a tiny bit short as compared to my factory harness, necessitating some minor routing changes, but no big deal. The odd thing is that it's just a modified OEM harness so I'm not sure why the lengths would be off.
I don't know exactly what would be needed for the modification, but I'm sure that if you had a little bit of know-how and a wiring diagram then it wouldn't be too hard. The V8R harness included a small fuse and relay box, but it's otherwise just a factory harness.
I can make them, I've done three so far for the E39.