How to open vanes in L5P file.

[2022_L5P]

Currently truck idles at 35% vpos but I was trying to open the vanes some more to around 10% at idle. From looking online it seems I need to adjust the cells between 600-800rpm and 0-15mm3 fuel within "vane position plus alt" but on my file there are multiples tabs under the vane position tab (see picture). Which one of those should I adjust and what numbers should I input into the cells.

Thank you

[projectlnf]

You kinda answered your own questions here.

Desired vane position tables

And if you want it to sit at 10% then put 10 in the table at that given rpm and mm3