Results 1 to 8 of 8

Thread: Need a little help

  1. #1
    Tuner in Training
    Join Date
    Mar 2006
    Location
    Sarasota, FL
    Posts
    24

    Need a little help

    My 99 Vette was having a few issues so I took it to another tuners and we were trying to straighten it out. The car ended up eating a lifter on the dyno. Too make a long story short the car has 03 OS in it now and I don't have 03 licensed. I have tried an entire write and it did not work. I have other computers should I install a stock computer and write entire from there?

    TIA
    Brian
    Brian Delaney
    Corvette Concepts.com
    1999 Corvette FRC New Set up LS3 418 527/497
    Old set up 346 NA 448/416 11.33@124 1.68 60'
    2008 Corvette M6 Bolt-ons. 11.88@119
    2005 Silverado 5.3 Ext cab Intake and Tuning
    2000 Corvette FRC Heads and Cam

  2. #2
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    I think 03's have the new connector meaning they probably wont accept ANY other computer then an 03 vette computer.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  3. #3
    Tuner in Training
    Join Date
    Mar 2006
    Location
    Sarasota, FL
    Posts
    24
    04 was the new one Blue/Green 03 was still Blue/Red
    Brian Delaney
    Corvette Concepts.com
    1999 Corvette FRC New Set up LS3 418 527/497
    Old set up 346 NA 448/416 11.33@124 1.68 60'
    2008 Corvette M6 Bolt-ons. 11.88@119
    2005 Silverado 5.3 Ext cab Intake and Tuning
    2000 Corvette FRC Heads and Cam

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    ahh my bad...but yeah you'd need to be licensed for both to change operating systems.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Tuner in Training
    Join Date
    Mar 2006
    Location
    Sarasota, FL
    Posts
    24
    I have 2000 license and computer can I install the computer and tune the car?
    Brian Delaney
    Corvette Concepts.com
    1999 Corvette FRC New Set up LS3 418 527/497
    Old set up 346 NA 448/416 11.33@124 1.68 60'
    2008 Corvette M6 Bolt-ons. 11.88@119
    2005 Silverado 5.3 Ext cab Intake and Tuning
    2000 Corvette FRC Heads and Cam

  6. #6
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,268
    you should be able to...can't see why not.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  7. #7
    Tuner in Training
    Join Date
    Mar 2006
    Location
    Sarasota, FL
    Posts
    24
    Thanks for the help Foff
    Brian Delaney
    Corvette Concepts.com
    1999 Corvette FRC New Set up LS3 418 527/497
    Old set up 346 NA 448/416 11.33@124 1.68 60'
    2008 Corvette M6 Bolt-ons. 11.88@119
    2005 Silverado 5.3 Ext cab Intake and Tuning
    2000 Corvette FRC Heads and Cam

  8. #8
    Tuner
    Join Date
    Jun 2004
    Location
    Clearwater, FL
    Posts
    74
    Got a few bin files from the pewter car both 346 and 402, mail me the pcm and I'll flash it for you.
    Just don't tell the ole man.