I am trying to dial in tuning on the transmission. Used BlueCat, which was a big help. After getting the right PIDs and scanning the TCC, I think the parameters are correct. TCC applied "off" and "on" operate as it should and TCC mode seems somewhat okay (apply en at 19:53, apply at 19:58 and locked at 20:07). But I cannot physically feel it engaging. So, questioning whether it is working or not. Log attaged.
It is also interesting that locked is applied when under load and apply is shown when under light load. Due to this, can someone look at the trans settings in the attached tune?
So, do you see anything that seems like it would prohibit TCC engagement?
Thank you!