I purchased a AEM 30-0300 Wideband & the prolink to run threw my MPVI3. Wired it up as a portable unit with a 12v cigarette lighter plug. Added the channel i VCM scanner as (External inputs/mpvi3/prolink plus/input red 1) as this is how i wired in the pro link. Went in to Transform and changed it to EQ ratio/AEM 30-(03x0). My problem is my gauge is reading less than 1 lambda .950 and lower but in VCM scanner its reading 1.3+

maff 2.hpl
I've attached my log file.
im reading eq ratio mathn err in % / MAF sensor in hertz

Ive tried to do my due diligence looking at the sticky posts and threw the old threads but im not finding anything on this problem.