hi below is my tune, I am experiencing a weird tcc lockup issue; where I will be driving at a speed/rpm/tps for the converter to apply, but it doesnt. *sometimes*. i have reviewed the tcm edits and put most of the torque converter settings back to stock minus desired slip, and raising offset to 70 and gain to 1.0, etc. i have tried disabling adapts (not sure i did it correctly)
while i am driving at speed, with the signal unwilling to be sent to lock the tcc, i can manually lock it with scanner the special functions and it will remember to lock from then forward..with adapts on
ive read maybe the misfire count could be not letting the tcc apply? i have 10 total misfires while driving around town idk if that's setting it off
super weird and annoying any help or direction would be appreciated. iron5.3 low idle2 trans tuned2.hpt