On my truck, I'm wanting to lift the front end by a half inch and all lifting kits I'm seeing are 1 inch (I'm keeping it simple by using a spacer under the strut mount on the lower control arm)
If anybody knows of a machine ship that can either make some spacers, or mill down some 1 inch spacers I'll send to them, please let me know there contact info. Thanks!
Here's a pic of the 1 inch spacers that I'd like to have in 1/2 inch instead of 1 inch...
Pic1__JPEG.jpg
This is for tuning.Originally Posted by Rockrz
You already made a post on the truck forum. https://www.silveradosierra.com/thre.../#post-7437502
At least he posted in off topic section so I would cut him some slack. Spacers look easy enough to make if you have the dimensions. Any weld/machine shop could do it, or even home made with a drill and jig saw if AL is ok.
There are also online places such as sendcutsend.com and competitors.
I had at one time, 9 sets of half inch spacers for the top of the strut. They measured about 3/8 thickness for a half inch level. Couldnt get rid of them so traded the whole box for some used parts or something.
Wish you still had them!
Reply With Quote