End of injection timing

[bradley029]

.im fairly new to tuning and recently installed a BTR 220 cam msd intake and LTH and was wanting to degree in my eoit but cant seem to find the paramaters .
i have the mpvi3 and under engine\ fuel\general theres a base table for soit but all the eoit settings are for split base unless im overlooking something simple or is that what i adjust?
i thank u kindly for any input and im much oblidged

2021 SS 1LE BTR220cam/valve springs/pushrods/msd amomic intake/1-7/8 LTH /catless 3" SS exhaust/CAI/catch can/MSD 2 step/a manual of coarse:

[TriPinTaZ]

You can't directly adjust EOI on Gen V LT1/LT4's. Instead EOI is a result of SOI and Injector Spray time (in ms). You only adjustment is to move SOI sooner or later and EOI will follow. Split injection is only used in cold start mode on the Gen V LT1/LT4 stuff.

[bradley029]

thank you very much for the information