i was wondering what the torque delta table is? its under engine diagnostics>general>torque correlation>torque delta. ive seen some people max it out, and others not, so im curious what it does
i was wondering what the torque delta table is? its under engine diagnostics>general>torque correlation>torque delta. ive seen some people max it out, and others not, so im curious what it does
2019 challenger rt
k&N cold air intake
92mm hellcat throttlebody
ported 392 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers and catless mid pipes
3' catback with h-pipe & pypes violator mufflers
e-85 tuned
3.70 lsd
i would not change it
it is most likely something the factory added rather than starting over on the pcm software
maybe if you post the question in the engine section it will get more traction
Woops, thought i did. But it was increased on my tune vs stock by my old tuner
2019 challenger rt
k&N cold air intake
92mm hellcat throttlebody
ported 392 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers and catless mid pipes
3' catback with h-pipe & pypes violator mufflers
e-85 tuned
3.70 lsd
Some tuner max them to avoid torque error after sc…
I figured out what it is. It pulls power based the expected and actual torque error
2019 challenger rt
k&N cold air intake
92mm hellcat throttlebody
ported 392 intake manifold
ported eagle heads
Cammotion custom 222/234 cam
stainless works long tube headers and catless mid pipes
3' catback with h-pipe & pypes violator mufflers
e-85 tuned
3.70 lsd