Pops and Bang (burbles) problem. Cruise control problem.
hello. Can someone solve these 2 problems for me?
1. I make Burbles.. OK. I modify the 2 tables in Minimum Spark. Base and Long Temp. Very little. only the first 3 lines and only from 4,000 to 6,000 RPM
Sounds really good.
The problem... When it's bubbling I feel like the car doesn't hold well... sometimes even if you lift your foot off the accelerator it can continue bubbling for a long time without barely dropping the RPM...
I have also tried to make the typical adjustment in the virtual torque maps... but the problem continues...
2nd problem..
He's done this forever...
The cruise control works well.
But when I accelerate hard and express a speed.. It stops working...
Until I stop the car and start driving again, it doesn't work again.
It is annoying to overtake a car with your foot on the floor, and for that reason the cruise control does not work afterwards.
I still don't know of anyone who can solve this.
All cars can do it well, they decelerate by making explosions and fire... and they don't have engine retention problems... I don't know why it's so difficult in this one.
Reply With Quote
Originally Posted by Alex14SS
