Originally Posted by
edcmat-l1
OK, looking at your data log, you're logging a bunch of trans pids but no torque management pids. I would get rid of ALL your trans pids EXCEPT trans current gear, TCC slip and TCC locked. Get rid of all of them besides those 3. Then, add as many torque management pids as possible.
Once you have that setup, do another data log. You need to capture what you're trying to diagnose. When you do, you'll need to know where it is in the data log so you can point me/us to it. There are 2 timers at the bottom of the scanner. One is clock time the other is data log run time. I need to know when it happens in data log run time.
That's your homework for this evening.