Results 1 to 3 of 3

Thread: Stanadyne 1150-250 High Pressure Fuel Pump LT4+

  1. #1
    Tuner in Training
    Join Date
    Jun 2016
    Posts
    42

    Stanadyne 1150-250 High Pressure Fuel Pump LT4+

    Looking to see if anyone has any data for this pump. We've installed it on a 2019 Camaro LT1 with a Procharger. I used LT4 values in the file as a base, thinking I could adjust from there, but the pump is not making pressure under load. Exact pump in question is this pump - https://lsa-conversion-store.myshopi...-fuel-pump-lt4.

  2. #2
    Senior Tuner edcmat-l1's Avatar
    Join Date
    Aug 2006
    Location
    5BA8
    Posts
    3,253
    Have you checked your supply pressure? With no data log or tune file to look at, not much to be said. Doing a quick read on that website, looks like it should work with LT4 specs.

    EFI specialist
    Advanced diagnostics, tuning, emissions
    HPtuners dealer and tech support
    email=[email protected]

  3. #3
    Tuner in Training
    Join Date
    Jun 2016
    Posts
    42
    Supply pressure is good. If we reinstall the stock pump and revert the tune, the stock pump builds pressure as normal. I would post the file, but I don't tune a lot of GM's and a buddy of mine helped me out with part of the tune. Being it's not 100% my work, I wouldn't feel comfortable posting it. My guess is the internal regulator is faulty. We'll ohm it out and see if we can determine anything. Thanks for the reply!