I set the Disable RPM to 3500 and the Re-Enable RPM to 3000. I also set the Disable TPS to 50% and Re-Enable TPS to 45%
In the Scanner I have A/C Clutch listed in the status bits.
I know these are really low, just trying to get an understanding on what happens and or what should happen.
I waited till the A/C clutch showed engaged and I hit WOT. I held it up to highway speeds, takes a long time in the Astro, and the A/C clutch remained engaged.
What I was expecting to happen was that the A/C clutch would disengage when either the TPS or RPM's was exceeded. Is this what should happen or does this setting just prevent the A/C from engaging when the criteria is met?
Thanks