Results 1 to 10 of 10

Thread: vcm editor wont open engie-trans-system tabs

  1. #1
    Tuner Onomoto's Avatar
    Join Date
    Aug 2018
    Location
    Ohio
    Posts
    120

    vcm editor wont open engie-trans-system tabs

    Hello all, 2 days ago adjust some settings in my tune saved the file and put the laptop on sleep mode. Today i opened the editor and and now none of the system tabs for engine- trans- trans-diag nothing will work. I've tried other tunes and also shut down and restarted the laptop. looks like it did a security update while i wasn't using the computer. My laptop isn't giving me a option to revert to a later date neither. Im lost
    2001 monte carlo swapped l67 on e85
    XP cam
    gen5 m90
    NorthStar throttle body
    speed daddy headers 3inch exhaust
    3.0 pulley
    lq4 maf
    cold air filter behind bumper
    60 lb injectors

  2. #2
    Tuning Addict blindsquirrel's Avatar
    Join Date
    Apr 2017
    Location
    Meridian MS
    Posts
    7,556
    It might, MIGHT, help you get less lost if you post the file here so someone else can open it and see if they see the same thing you see. You see?

  3. #3
    Tuner Onomoto's Avatar
    Join Date
    Aug 2018
    Location
    Ohio
    Posts
    120
    lets try this again
    Attached Files Attached Files
    2001 monte carlo swapped l67 on e85
    XP cam
    gen5 m90
    NorthStar throttle body
    speed daddy headers 3inch exhaust
    3.0 pulley
    lq4 maf
    cold air filter behind bumper
    60 lb injectors

  4. #4
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,261
    go to window-cascade

    This will unhide any windows(which is likely the issue)
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  5. #5
    Tuner Onomoto's Avatar
    Join Date
    Aug 2018
    Location
    Ohio
    Posts
    120
    Bill your awesome that did the trick. Thank you sir
    2001 monte carlo swapped l67 on e85
    XP cam
    gen5 m90
    NorthStar throttle body
    speed daddy headers 3inch exhaust
    3.0 pulley
    lq4 maf
    cold air filter behind bumper
    60 lb injectors

  6. #6

    Help with Advanced View.. Please.

    Can someone please look at this file and tell me why I can't see advanced tabs? When I saved this file 10 months ago I was able to see all tabs in advance. I tried opening it today to look at some setting and only can see the basic view. I've been reading and trying everything I read with no luck .. This issue is above my head.. 2014 Silverado Knight Original 5312023.hpt

  7. #7
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,261
    edit-view-set to advanced.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  8. #8
    Thanks Bill, I tried that several times and no luck. Advanced is checked and I would open up the file and can't see all tabs.

  9. #9
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,261
    post the file and a screenshot of what you are referring to.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"

  10. #10
    HP Tuners Support
    (foff667)
    Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,261
    file appears to work fine for me that you posted previously.
    It doesn't have to be perfect, it just needs to be done in two weeks...

    A wise man once said "google it"