Hey guys I would appreciate some insight as to what could be wrong with this setup/calibration.
2000 Escalade LQ4 swapped p59 controller Speed Density OS
Truck Norris cam with BTR .660 springs
PSI conversion harness w/DBW setup.
Runs great just needs some suspension work at this point. My problem is startup, seems like its not firing at the right time on first crank sometimes. Fuel pressure gauge showed I'm holding at least 30 psi after about an hour so I don't believe its a supply issue. Tried Leaning out and richening up on start up but ultimately same condition. If I turn the key on, then key off, then crank it seems to start right up most times but not always. I'm wondering if I'm having a voltage issue or something, also using ls3 coils on it. Didnt change any dwell settings though, don't know if that could be an issue. Ill attach logs and my tunestart up log.hplstart up log 2 no start.hplstart up log 3 long crank startup on 2nd crank.hplTune File speed Density.hpt