2018 grand cherokee 3.6L that I've had to take apart and apparently they want a relearn procedure after replacing cams, rocker arms, etc. Is this possible within HP Tuners? Where can I find the procedures? TIA.
2018 grand cherokee 3.6L that I've had to take apart and apparently they want a relearn procedure after replacing cams, rocker arms, etc. Is this possible within HP Tuners? Where can I find the procedures? TIA.
If it doesn't set a code, don't worry about it. If it sets a code and turns on the CEL, then worry about it.
EFI specialist
Advanced diagnostics, tuning, emissions
HPtuners dealer and tech support
email=[email protected]
there has to be a way...
you can do a crank relearn.
gotta be able to do the cams.
one at a time most likely but there has to be a procedure
the guys i would ask are both on challenger talk as well as here i believe
spoolboy or chally tatum