Results 1 to 3 of 3

Thread: Newbie - Idle help on LQ9

  1. #1
    Potential Tuner
    Join Date
    Oct 2013
    Posts
    4

    Newbie - Idle help on LQ9

    good afternoon everyone,
    First time tuning.
    I've watched the youtube clips on goatropegarage and read on here for a long while.
    Now that spring is here in Massachusetts, i'm getting back to tuning my WS6 with an LQ9. (kid grenaded the LS1 and I bought an LQ9 off a guy who put in an elgin SS2 cam and 243 heads; never heard it run but took a shot on it.

    I got it running last fall but haven't touched it in a while.
    Regardless, i got it started today for the 1st time in months and can't seem to get the idle right.

    Any help getting this idle squared away so i can start looking into other areas would be an amazing help.
    (i know i need to continue read and watch more youtube videos)

    I know enough to post the log and tune at least, right?

    Thanks in advance
    Jim
    Attached Files Attached Files

  2. #2
    Potential Tuner
    Join Date
    Oct 2013
    Posts
    4
    something definitely going on that i clearly cannot figure out where the misfires seem to go up, then reset, then go up, then reset....

  3. #3
    Senior Tuner
    Join Date
    Nov 2006
    Posts
    2,742
    The misfire timers do not work with a cam. You can max them out.
    Tuner at PCMofnc.com
    Email tuning!!!, Mail order, Dyno tuning, Performance Parts, Electric Fan Kits, 4l80e swap harnesses, 6l80 -> 4l80e conversion harnesses, Installs