No low end power 6.0 powerstroke

[Mead]

So I have been fighting a low end power issue. I cant seem to build past 2-3 psi when brake boosting. No matter easing into the throttle or full throttle. It just dumps fuel sits at 2500 rpm and never goes past. When rolling I can ease into it above 3200 rpm and start to build the boost for the power but I cannot seem to get digs or build any boost under 3200rpm for anything.

My truck is a Stage 2 KDD block with stage 2 cam, 205/30 injectors, stage 3 kc Jetfire turbo. built trans with billet triple disk converter.

Anybody have any ideas at what i am missing that may cause the issue. I can send a file for my tune if need be. I can also log me trying to do a burnout.

[Cal Naughton Jr]

Hard telling not knowing. Going to need to see the log and tune.

I'd start by taking a look at your EBP Desired tables.

[Mead]

Hard telling not knowing. Going to need to see the log and tune.

I'd start by taking a look at your EBP Desired tables.

okay i will log a dig full throttle log on my way home as far as tune I will add it to this thread.

Tk HP Tuners Tune.hpt

[Mead]

Hard telling not knowing. Going to need to see the log and tune.

I'd start by taking a look at your EBP Desired tables.

What should an EBP table really look like i have my low at 6psi and my high at 35psi curved