Intitial Startup 14RT.hpl
Just got the BTR Truck Norris cam installed along with the Pushrods/springs/ whatever lock/limiter it comes with as well as an MDS delete with "hellcat" lifters. I also put some catless longtubes on it at the same time. When cold it started up and idled pretty good but as soon as she got any temp in her it started acting up then quickly died. The attached log is trying a warm start, as you can see its not going well. I just need help geting her to run good enough to limp it over to the local dyno.
Thanks!!
Forgot to mention that I did mess around with some idle setting and some other basic stuff based on some youtube content but it doesnt seem to help much.