I have a 2005 ctsv with an 8l90 swap and I'm curious if there is a way to get the pcm to pull timing on shifts? At the moment I'm running the stock os and a manual trans segment on the p59. I am able to get torque management to work on launch with throttle cut and spark pull, but i see no timing pull being done on the shifts even with trans abuse and all the TM parameters set to what a truck or auto car would have.
I know there are other factors behind torque management and without the trans being present its not going to be happy. but if i change to another os or change the trans segment to non electric auto is there a way to get it to work?
i can upload the tune and log after i get off work.
The pcm does see the correct speed as well and its functioning happy without any codes or anything.