Page 10 of 10 FirstFirst ... 678910
Results 181 to 182 of 182

Thread: EEC-V Support

  1. 1 Day Ago #181
    Bill@HPTuners
    Bill@HPTuners is offline
    HP Tuners Support
    (foff667)     Bill@HPTuners's Avatar
    Join Date
    Jun 2004
    Location
    Hailing from Parts Unknown
    Posts
    28,526
    Quote Originally Posted by Plattfast View Post
    I have a 2004 Cobra. Supported vehicle list says Mpvi2 only works for this so that is what I have been using. Do I need to log with Mpvi3 and tune with Mpvi2?
    MPVI3 scanning is likely going to be better for EECV, MPVI3 editing/flashing are going to work similar to MPVI2. If you have one of each device we would recommend combining them unless you need them separately for some reason.
    You can open a support ticket here https://support.hptuners.com/
    Reply With Quote Reply With Quote
  2. 5 Hours Ago #182
    fumanchu182
    fumanchu182 is offline
    Tuner fumanchu182's Avatar
    Join Date
    Oct 2019
    Location
    Maryland
    Posts
    81
    Quote Originally Posted by Eric@HPTuners View Post
    Out of the box, if you hook up an MPVI3 to any EEC, it will tell you not supported until you get the EEC specific firmware.
    Interesting thread I'm glad I stumbled upon it. I have both an mpvi2 and a mpvi3. I keep the mpvi2 around for legacy reasons. If I add the beta firmware to the 3 does this prevent me from still using it as normal for Mopar applications? I will create a support ticket today.
    Hellcat PB > ET: 10.092, MPH: 135.650, 60': 1.492, R/T: .000
    Bone Stock Scat Pack PB > ET: 11.612, MPH: 119.52, 60': 1.634, R/T: .000 (gone but not forgotten).

    https://youtube.com/user/fumanchu182
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »