EEC-V Support

[Bill@HPTuners]

I have a 2004 Cobra. Supported vehicle list says Mpvi2 only works for this so that is what I have been using. Do I need to log with Mpvi3 and tune with Mpvi2?

MPVI3 scanning is likely going to be better for EECV, MPVI3 editing/flashing are going to work similar to MPVI2. If you have one of each device we would recommend combining them unless you need them separately for some reason.

[fumanchu182]

Out of the box, if you hook up an MPVI3 to any EEC, it will tell you not supported until you get the EEC specific firmware.

Interesting thread I'm glad I stumbled upon it. I have both an mpvi2 and a mpvi3. I keep the mpvi2 around for legacy reasons. If I add the beta firmware to the 3 does this prevent me from still using it as normal for Mopar applications? I will create a support ticket today.

[Bill@HPTuners]

Interesting thread I'm glad I stumbled upon it. I have both an mpvi2 and a mpvi3. I keep the mpvi2 around for legacy reasons. If I add the beta firmware to the 3 does this prevent me from still using it as normal for Mopar applications? I will create a support ticket today.

it will NOT prevent you from using it as normal for Mopar applications.