EEC-V Support

[Eric@HPTuners]

I re-read, and now I feel dumb because I missed the part at the beginning of the thread about this being for MPVI 3 exclusively.

You can read/write with the MPVI2. Just the logging is broken.

[Siny]

Eric, will you have support for the 2001 Ford Expedition 5.4 (MQAH1BA strategy)?

[Eric@HPTuners]

Added it today. Latest beta.

[Eric@HPTuners]

Added 1998 Ranger 4.0L today. Came through support. If you have an EECV vehicle you want added, send it in.

[LUKAS98]

Hi,

i have european ford car with eec-v (ford puma 1.7 1998, ford FOCUS 1.6 2000, ford FOCUS 2.0 2002)

i have mpi v2

i have broken strategy for this car i can help to add this car in hptuners

[Eric@HPTuners]

Hi,

i have european ford car with eec-v (ford puma 1.7 1998, ford FOCUS 1.6 2000, ford FOCUS 2.0 2002)

i have mpi v2

i have broken strategy for this car i can help to add this car in hptuners

I just need the strategy ID for those and can add.

[zr1driver]

Puma 1.7

[LUKAS98]

I just need the strategy ID for those and can add.

focus 1.6 : KQAH3T4.HEX

focus 2.0 : KQAH2AW.HEX

puma 1.7 : AXPDCB3.HEX

[LUKAS98]

Puma 1.7

love drive this

[Eric@HPTuners]

love drive this

Got you covered. I'll get ya going by the end of the week most likely.

[LUKAS98]

thanks

[Jaden52]

Got you covered. I'll get ya going by the end of the week most likely.

I haven't bought the MPVI yet as almost everything I'm wanting to tune is an EEC V and it's pretty much impossible to find an MPVI2. The vehicles I'm wanting to be able to tune are a 2004 eddie bauer 5.4 4x4 expedition, a 2000 2.5 ford ranger and a 99 4.2 F150 2wd.

I don't have the strategy codes for any of them though but wanted to be sure I'd be able to tune them before I bought an MPVI3.

Thanks,

Jaden

[Eric@HPTuners]

Puma 1.7

Here you go. Latest beta will open.

[geor9731]

Mine is attempting to read the file and then times out. Farthest it has gone is about 35%.
Any thoughts? Attached screen shots.
Thanks

[LUKAS98]

Here you go. Latest beta will open.

great, possible to add other map? like open loop stabilized fuel (used in wot) / VCT map / torque limit gear?



vct map.jpgol stabilized fuel.jpg

[zr1driver]

great, possible to add other map? like open loop stabilized fuel (used in wot) / VCT map / torque limit gear?



vct map.jpgol stabilized fuel.jpg

VCT cnontrol and WOT Fuel is here. Torque by Gear would be great.

Puma.PNG

[LUKAS98]

strange name, this strategy have 2 BASE FUEL and 1 open loop stabilized map

[Eric@HPTuners]

Mine is attempting to read the file and then times out. Farthest it has gone is about 35%.
Any thoughts? Attached screen shots.
Thanks

Do you have the MPVI3 firmware?

[Kelthika]

Wait am I understanding this right or am I stupid? Does the MPVI3 now support EEC-V and the 03/04 Cobra?

I?ve been waiting a long time for the support to drop before picking up the MPVI3, if I?m understanding correctly it?s now supported and I can pick one up?

[geor9731]

Do you have the MPVI3 firmware?

Yes. I sent you my info and have done a resync and it did update my firmware on the MPVI3. I assume that updated it to what I need. I have the most current Beta unless that changed real recent.