EEC-V Support

[[email protected]]

Also is there support for 1999-2003 7.3 diesels in VCM scanner yet? i have 3 waiting on that,

[Toadsquee]

I too have been trying to get another eec-v vehicle added. Ticket 445451. 1999 cv p74

[FC3S Murray]

So what if your MPVI2 still doesn't recognize the interface?

I have a 2003 Cobra Terminator that I am trying to download for a friend.

I have all the latest drivers installed.

Are all these EEC-V bugs not a problem on the MPVI3 only?

[Cranked Automotive]

So what if your MPVI2 still doesn't recognize the interface?

I have a 2003 Cobra Terminator that I am trying to download for a friend.

I have all the latest drivers installed.

Are all these EEC-V bugs not a problem on the MPVI3 only?

Check the pcm for a plug in piggyback chip

[FC3S Murray]

Will do and thank you for the tip.

[tunechy]

ocupo un tune para poder moverle a un mustag gt 4.6 1998

[dlc_racing]

ocupo un tune para poder moverle a un mustag gt 4.6 1998

al menos intenta usar el traductor de google x q si deporsi en ingles es dificil en eespa?ol espera sentado q te ayuden

[tunechy]

al menos intenta usar el traductor de google x q si deporsi en ingles es dificil en eespa?ol espera sentado q te ayuden

jajaja ok muchas gracias lo tomare en cuenta

[tunechy]

I need an original tune to be able to move it to a 1998 mustag gt 4.6, someone will have one?

[chadrzr90]

I am trying to connect to a 1999 Ford Lightning. Is support in the latest vcm suite download or is it a seperate file i need? Also i have a mpvi2. Will it work or do i need a mpvi3?

[Gmann951]

I believe Eric mentioned it is only supported by MPVI3 with the EECV firmware and the latest VCM beta

[chadrzr90]

I thought I had read somewhere the 2 was but not the 3 yet. Looks like I?m going to have to trade up if that?s the case.

[Outlawz177]

If I buy the mpvi3 I can or cannot tune a 1999-2004 mustang gt and a Mach 1 2003 when I emailed they said no but what I?m reading here you can ? I just need to knew before I buy the 3

[svomadness]

Started a ticket for 2003 F150 ODAL1FA. Looking forward to selling my quarter horse

[jaydubb71]

If I buy the mpvi3 I can or cannot tune a 1999-2004 mustang gt and a Mach 1 2003 when I emailed they said no but what I?m reading here you can ? I just need to knew before I buy the 3

That's what I want to know also. I have a few customers asking me to get into tuning Fords.

[jr2185]

If I buy the mpvi3 I can or cannot tune a 1999-2004 mustang gt and a Mach 1 2003 when I emailed they said no but what I?m reading here you can ? I just need to knew before I buy the 3

The very first post of this thread say 96-04 V8 mustangs are supported. You need the beta software and the EEC-V firmware.

Since this is all in beta so far, I wouldn't be to quick to go by what support says.

[Eric@HPTuners]

If I buy the mpvi3 I can or cannot tune a 1999-2004 mustang gt and a Mach 1 2003 when I emailed they said no but what I?m reading here you can ? I just need to knew before I buy the 3

All the V8 Mustangs are covered.... Support won't say much about it because its not the production firmware. Once the firmware is merged into the production firmware, the supported list will be updated.

[Eric@HPTuners]

The very first post of this thread say 96-04 V8 mustangs are supported. You need the beta software and the EEC-V firmware.

Since this is all in beta so far, I wouldn't be to quick to go by what support says.

This.

[Hubes]

Once the firmware is merged into the production firmware, the supported list will be updated.

Any idea when this will be?

[Outlawz177]

This.

What will need to get the beta just purchase the mpvi3 ?