Results 1 to 4 of 4

Thread: Turbo Ecotecs READ

  1. #1
    Tuner in Training
    Join Date
    Oct 2006
    Posts
    31

    Turbo Ecotecs READ

    Is it possible that all turbo ecotec's post there tune so i can compare it to my tune, this would help me out alot, if you could post your tune and all mods you have would be nice...

  2. #2
    Advanced Tuner redhotjamedjimi's Avatar
    Join Date
    Dec 2006
    Location
    Philadelphia, PA
    Posts
    352
    06 stock cobalt.
    crazy amounts of fuel. an occasional p0172 too rich code. but its fast.
    2006 SS Cobalt SC
    Stage 2 ZZP Cams
    Headers, 3.0" Full ZZP Exhaust
    60lb inj. Intake.
    2.8 Pulley
    72# Lb. Supertech Springs
    LNF Ext Valves and lashers
    Cobre H/E, option B.
    Torque Damper
    HPTuned.
    Bitchin'
    .

  3. #3
    Tuner in Training
    Join Date
    Oct 2006
    Posts
    31

    I rem you were helping me earlier

    I just got my car from germany and I added... the sparkcontrol I changed the ECT and IAT all to 1.0 's like you told me...Its ran better but as you look in the scan i posted about 3 mins in I hit like 4,000rpms and my motor just died...if you could take a look at my scan and give me some suggestions...next week i'm putting in 42lb injectors and a 1:1 fuel regulator...so it should help out...

  4. #4
    Advanced Tuner redhotjamedjimi's Avatar
    Join Date
    Dec 2006
    Location
    Philadelphia, PA
    Posts
    352
    hard to say you arent loggin a great number of variables. my car did this once after i messed with settings. then never again.
    2006 SS Cobalt SC
    Stage 2 ZZP Cams
    Headers, 3.0" Full ZZP Exhaust
    60lb inj. Intake.
    2.8 Pulley
    72# Lb. Supertech Springs
    LNF Ext Valves and lashers
    Cobre H/E, option B.
    Torque Damper
    HPTuned.
    Bitchin'
    .