Results 1 to 7 of 7

Thread: 2010 Jeep Wrangler 42RLE Shift Tables XDF

  1. #1
    Advanced Tuner
    Join Date
    Sep 2023
    Posts
    277

    2010 Jeep Wrangler 42RLE Shift Tables XDF

    Attached is an xdf file for a 42RLE transmission in a 2010 Jeep Wrangler for the shift tables. The shift tables are not labeled as I have no idea which is which but the throttle axis and the output shaft speed axis is correctly set. Anyone who uses this will need to figure out which table is which. If anyone desires to have the lockup tables added to the xdf just let me know here.
    Attached Files Attached Files

  2. #2
    Advanced Tuner
    Join Date
    Sep 2023
    Posts
    277
    Here, added the lockup tables to the xfd anyways, it was quick and easy. also added what i am pretty certain is max line pressure while in gear parameters.

  3. #3

    2010 Jeep

    Jim,

    This is the stock file I am trying to get transmission shift tables for. HPtuners is not willing to do the work to add the parameters to the definition.
    Attached Files Attached Files

  4. #4
    Advanced Tuner
    Join Date
    Sep 2023
    Posts
    277
    You have it saved as 2010 but it says in the file 2007

  5. #5
    Advanced Tuner
    Join Date
    Sep 2023
    Posts
    277
    Give me a bit and I'll post up an xdf, you'll have to figure out which table is which though

  6. #6
    Advanced Tuner
    Join Date
    Sep 2023
    Posts
    277
    Here you go
    Attached Files Attached Files

  7. #7
    It is a 2007 thank you I just need to figure out what tables work on this one.