To start I did a 24x conversion on a 97 camaro with an LT1, eficonnections kit and a gen 3 PCM. Car originally had a 3800 in it at one point.
I've been racking my brain over trying to log an tune this for roughly a month. It starts and runs decent, and I have it running about 70% of where it should be by reading posts here and other various sources.
The fine tuning for MAF and SD has me completely stumped. I've followed guides on this forum, watch videos several times to make sure I was setting things up correctly. Sadly every time I start to log and capture data, nothing comes up. For some reason I can't add the PID's to the channel list I need, only options I have are for the basic ones. All the videos I see they are all available for the gen 3, but for some reason I can't add them as if they're not supported.
I do know my MAF is working, as I can graph it with free software and ELM devices but that's the extent of it.
Is there a setting or config I may be missing? If there is anything I can provide from my software screenshot of configuration file, I will gladly do so. I am new to HPT, but it really seems to be the best out of box approach.