Well, thanks to Eric... Big shout out to him. I was finally able to get this lightning on the dyno and get it dialed in. She turned in 662 wheel torque and 550 wheel horsepower!!
This thing is a absolute riot to drive. Wish i had a vid of the dyno but video took a crap on me.
Nice numbers
It doesn't have to be perfect, it just needs to be done in two weeks...
A wise man once said "google it"
whats the engine setup? i suppose all stock lol
I've done a couple of the older lightnings since HPT started support for them. Didn't have any issues. Looking great!
2009.5 PBM G8 GXP M6 W/Roof-Self tune, OBX LTs, Kooks axleback, LSA blower, cam,
Monster LT1-SC clutch, flex fuel, 12 psi [email protected] 1,800 D.A
2007 TBSS-Self tune, bolt ons [email protected], 1,900 D.A
1991 GMC Syclone- Self tune/catback 12.8@104, 4,200ft D.A
Yup all stock...
Internals are forgie's but other than that stock displacement with a 3.4 whipple. Injector dynamics 1000cc injectors and a sct ba3000 maf. I cant say enough of the work
Eric at hp put in for these eecv pcm's. Made things what would have been near impossible to a shear breeze with the logging channels. One thing i wish i could see is injector
pulse width. Maybe i missed it, idk. Anywho thanks everyone!
Pulsewidth is there. You have to select the right channel for it based on the EEC-V processor speed, and we do the math to spit it out correctly.Originally Posted by InandOutPerfromance
Yup all stock...
Internals are forgie's but other than that stock displacement with a 3.4 whipple. Injector dynamics 1000cc injectors and a sct ba3000 maf. I cant say enough of the work
Eric at hp put in for these eecv pcm's. Made things what would have been near impossible to a shear breeze with the logging channels. One thing i wish i could see is injector
pulse width. Maybe i missed it, idk. Anywho thanks everyone!
Eric Brooks
HP Tuners, LLC
HP Tuner Team,
Need to get the EEC-V firmware for my MPVI3. It will arrive by UPS soon. I will get registered and post the serial number so you send firmware.
Thanks.
James
Reply With Quote