48RE shift point tuning 05

[modblaster]

Hi, i use bullydog GT , i will maybe ditch it for a HPtuner but i need know , if i can play with the shift point on my 48RE? Or this option are no available now? Thanks

[Jim P 2.0]

Yes you can adjust the shift points but you need to move the anti gear hunt parameters out of the way

[1baddodge]

Hey I don't mean to hijack this thread but are you the same gentleman that wrote a tune for 6.7 into a 5.9 truck with 5.9 ecm? Could use your help if so. I don't see a way to private message here

[Jim P 2.0]

Yes I did write a tune for a 2005 with a 6.7 engine running on a 5.9 ecm

[1baddodge]

Can you write tunes for efi live also? For a 2006 ram 3500 with a 6.7? Or just for hp tuners. I have an early 04 that I plan on swapping a 6.7. Do you tune with 6.7 injectors or 03-04.
Thanks. And how much for the tunes?

[RGHTBrainDesign]

Yes you can adjust the shift points but you need to move the anti gear hunt parameters out of the way

Dropping you a PM. Can you elaborate?

Min Throttle Anti-Hunt is 20% in the 3rd Gen trucks. Would that be something like raising that throttle limit to 30% or so?

[Jim P 2.0]

Dropping you a PM. Can you elaborate?

Min Throttle Anti-Hunt is 20% in the 3rd Gen trucks. Would that be something like raising that throttle limit to 30% or so?

Move it up to max value to get it out of the way. There are shift boundary windows that come into play as well, they define acceptable window a shift is allowed to occur within if I remember right, that’ll have to be tweaked around as well

[Jim P 2.0]

It’s been absolutely ages since I touched anything 5.9L and 48RE related so I’m pretty out of touch on what I used to do with them, I’ve really only been focused on the 2010+ and lately it’s been far more code related stuff in the 2010+ where I’ve had a lot of my focus.