Gen 2 3.5 Ecoboost Base File

[bmpcamry09]

As a thanks to forum members for everything I have learned over the past year on here, figured I would share a file that I consider a "base" tune. I have used these changes as starting points on multiple gen 2 3.5 Ecoboost engines at this point for over a year and have had great success. A lot of this is loosely based on things I learned through The Tuning School as well as talking to some other pros. So sharing this file for those looking for where to start on one of these. This particular file is built off a 2018 Expedition, so may have to make some tweaks to make it work on your F150.

Trans. base tune is included as well.

Even though spark is not changed a whole lot, I would still run 91 octane plus on this file for safety.

Enjoy, and feel free to critique. That's what this forum should all be about anyways. GM side of HPT shares a lot more files than this Ford side and I hope to change that.

Gen 2 3.5 Ecoboost Base.hpt

[Nikkypfz6]

Dude! right on, my wife just bought a 2020 expedition after seeing how much i loved my 2018 explorer (3.5 ecoboost). I was planning on starting to tune it for her this weekend. looks like you've already started my homework for me. thanks!

[Beatty]

i used this file and have a small issue, its limiting throttle and rpm. ill attach a log shifts feel great. wot.hpl

[Friesm2000]

Just starting in the tuning world, but wonder how close it will be to a 19 navi though

[bmpcamry09]

Feel free to send me your Navi stock file and I can look at it and get you started.

[bmpcamry09]

Beatty, send me your stock file and I?ll take a look at that and the log tomorrow while I?m at work. Might be short shifting if you have something other than a 18. Ford changes some axis tables around 2020ish that can change some stuff.

[bmpcamry09]

Here ya go Beatty, made some changes, just FYI on 2020 and up stuff, you can't just copy and paste over everything as the PCM and TCM are integrated on 2020 and up and not separate computers, so the best way to make big changes is through a template applicator.

I added 5 PSI to your base shifts and applied a few other changes throughout the tune, this is about as good a base file your gonna get without paying the big bucks lol

Feel free to email me at [email protected] with a datalog and any other questions. I wouldn't mind having your base stock read as well to make sure the changes I made are good with your stock file.

Beatty with my changes V1.hpt

[Beatty]

Sorry I?m away from my laptop, I will send that stuff over tonight along with the file I ended up with. I did not copy and paste, I went through each change 1 by 1 but I could have missed something. Or like you said there could be something missing since it?s a 2020. I appreciate your time and work on this, it feels like a completely different truck. I?ll send some logs, I have a long highway drive with some hills and stuff in there as well.