I connect my 3 BAR Map(Gm 3bar) on my stock wiring, at atmospheric pressure it gives me 38 KPA while my 1 BAR gives me 98(normaly)… if it possible my 3 Bar is only a 2.5 Bar?
I connect my 3 BAR Map(Gm 3bar) on my stock wiring, at atmospheric pressure it gives me 38 KPA while my 1 BAR gives me 98(normaly)… if it possible my 3 Bar is only a 2.5 Bar?
the 3bar calibration is different to the 1bar. ie. what you see in the scanner will not be exactly 1/3 of the 1bar value.
I count sheep in hex...
ok, thanks