Before you read and flame, I've already searched on this topic and looked into the help section. It offers no more insight then what I have already tried...I keep getting an unable to read VCM check to make sure it's in the run position everytime I try to connect.
Things I've tried.
1. Different USB cable
2. Different Car
3. Checked all fuses
4. Reset PCM
5. Checked ODB-II port to verify it has power (checked pin outs)
6. Tried three different version of HP Tuners Software (ie. .14 , .16 etc)
7. Used the Clear last vehicle option button under options.
8. Different Laptops and different operating systems
It works in my 05 Cobalt Sedan (Scanning Version), Box works and connects to other cars. I am licensed on my car to work. Other peoples HPT box connect to my car perfectly fine...
Verified re-installation of HPT Drivers as well. The box flashes activity and tried to connect and fails at gathering vehicle information. Highly annoying and I've never really been able to enjoy using this product because of all the problems it has connecting to my 05 Cobalt SS/SC.. I've already been given a different box for the same reason before and new cables..
Please advise.
-Mike