Results 1 to 4 of 4

Thread: Tuning advice

  1. #1
    Tuner in Training
    Join Date
    Aug 2008
    Posts
    12

    Tuning advice

    I have a 2017 Z06, recently purchased and will install an ATI 15% under drive damper and pulley and cold air intake. I am used to tuning my gen 3 2001 vette with an MPVI1, just upgraded to the MPVI3. I do have Wideband. My question is, is there any other areas I need to make adjustments other than MAF scaling once I install upgrades?

    Thanks in advance.

  2. #2
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,466
    If you've never tuned a Gen 5 ECU before, you're up for a challenge. These newer ECU's are torque based and there is a lot more to it than the old Gen 3 LS1/LS6 stuff.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3

  3. #3
    Tuner in Training
    Join Date
    Aug 2008
    Posts
    12
    TriPinTaZ, Thanks for the reply. I was pretty certain it was going to be way different and more than I am comfortable doing. Are there remote tuners that I could pay to assist me with a tune? There are no tuners in my area.

  4. #4
    Senior Tuner
    Join Date
    May 2003
    Location
    South FL
    Posts
    1,466
    I tune a lot of Z06's. Email me if you're interested.
    [email protected]
    Owner/GM Calibrator
    Gen V Specialist - C7 Corvette, Gen6 Camaro & CTS-V3