Results 1 to 5 of 5

Thread: 1997 Silverado 5.7 Vortec 4l60e

  1. #1
    Potential Tuner
    Join Date
    Sep 2024
    Posts
    1

    Question 1997 Silverado 5.7 Vortec 4l60e

    i have a 1997 Silverado C1500 5.7 vortec thats got some jegs long tubes no cats and a 0411 swap, today i finally got my front o2 sensors put in and the truck runs okay on open loop a little rough and had been driving all week. although with the o2 sensors put in when the truck goes to closed loop it starts to kill itself. not super tune savy and definitely not experienced enough to come up with my own reasons. base file i used should be a 02 express with the 5.7 4l60e not sure why there would be a huge difference. i have 2 logs back to back just different channels and the tune file the truck is on right now. Any feedback is much appreciated and im more than willing to learn! Thanks!
    Base Tune Pre o2, Edging,Runs Like shit closed.hpt
    holy shit its working and it runs like shit.hpl
    still runs like shit.hpl

  2. #2
    Tuner in Training
    Join Date
    Nov 2020
    Posts
    12
    Have your evap setup correct? Unplug it ...by thermostat..

  3. #3
    Tuner in Training
    Join Date
    Nov 2018
    Posts
    44
    Something is up with those o2 sensors, wiring, something... They are reading full rich and if you look at your trims it's pulling fuel out like crazy trying to lean it out.

  4. #4
    Advanced Tuner
    Join Date
    Sep 2009
    Posts
    977
    My buddy was having a similar issue on his 98 as well as a drastic bank to bank split at idle. The 02 sensors had horrible placement in the headers. He moved the 02s about 6-8" downstream of the collector and drastically changed the 02 sensor signals.

  5. #5
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    3,930
    Shouldn't have voltages that high with the O2's. Wiring problem most likely.