Results 1 to 8 of 8

Thread: The lowdown on widebands?

  1. #1
    Tuner in Training
    Join Date
    Aug 2024
    Posts
    28

    The lowdown on widebands?

    I?ve been looking around in the forums and internet on the topic for a while now, and was wondering if someone could give me some more info on widebands.

    So essentially, are there pros and cons, similarities and differences with Lambda vs AFR?

    I’ve seen all the Bosch 4.2 and 4.9s, along with NTKs. What’s the ideal sensor in terms of cost and performance? I’ve read the NTK is relatively more durable than Bosch and that it’s actually considered “lab grade” but that’s all I’ve really gained.

    What about the best brand/controller/gauge on the lower prices ranges
    I’m aware of AEMS, Ballanger, NGk, PLX, etc but haven’t really seen any clearer answers which would be expected as I’m sure they are all good in many ways?

    Lastly, and a bit more specific, if I want to utilize a 14point7 unit, what’s everything I would need to put one of those together? Like what controller board sensors etc?
    If there’s a thread that covers this entirely or just one of my questions, would be greatly appreciated to be able to see.
    Last edited by Iwanski; 10-04-2024 at 10:33 PM.

  2. #2
    Tuning Addict 5FDP's Avatar
    Join Date
    May 2012
    Location
    Rogers, MN
    Posts
    13,860
    I've never once had a problem with the AEM widebands using the 4.2 and 4.9 sensors. They are very accurate for what they are.

    I can switch either to be using Lambda or AFR. For most it's all a personal preference but Lambda is generally easier because Lambda is Lambda is Lambda if you get what I mean.
    2016 Silverado CCSB 5.3/6L80e, not as slow but still heavy.

    If you don't post your tune and logs when you have questions you aren't helping yourself.

  3. #3
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,269
    If you plan on doing many cars, especially power adder/methanol, etc. Go with ballenger in a ntk sensor. AEM x-series are fine for light duty use. 14point7 seems to be good so far, i have duals on the dyno.

  4. #4
    Advanced Tuner
    Join Date
    Oct 2004
    Posts
    357
    If any part of your first sentence was true you would already have your answers.

  5. #5
    Tuner in Training
    Join Date
    Aug 2024
    Posts
    28
    I’m also relatively interested in personal experiences with such, not just data

  6. #6
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    3,965
    My AEM went bad in about a year. I don't like them, but it's cheaper to keep putting sensors in than to buy a new unit from someone else. Bosch O2 sensors, narrowband and wideband, are garbeege.

    As far as gauges, I prefer AutoMeter.

  7. #7
    Advanced Tuner
    Join Date
    Mar 2009
    Location
    Andover, MN
    Posts
    724
    Bosch O2 sensors, narrowband and wideband, are garbeege
    ?

    NB's, i can see that. buuuut.

    https://forum.hptuners.com/showthrea...ving-Into-2020

  8. #8
    Senior Tuner
    Join Date
    Mar 2022
    Location
    Indiana
    Posts
    3,965
    Quote Originally Posted by ns158sl View Post
    buuuuuuuuuutttttt

    "AEM Performance Electronics (“AEM Electronics”) warrants to the original consumer that all AEM Electronics Products will be free from defects in material and workmanship under normal and proper use for a period of 90 days from the date of the original purchase."

    https://www.aemelectronics.com/help/
    Last edited by SiriusC1024; 10-06-2024 at 12:38 AM.