Page 3 of 3 FirstFirst 123
Results 41 to 56 of 56

Thread: Injection timing truck norris cam LY6 e38

  1. #41
    Advanced Tuner
    Join Date
    Mar 2009
    Location
    Andover, MN
    Posts
    722
    Quote Originally Posted by Balakayt. View Post
    The more i learn the more there is to learn lol. Anyone know of a program i can use to get a Gen 5 BIN file off my truck by chance? i have a mongoose GM 2 cable.
    poke around pcmhacker. there is a D/L there.

  2. #42
    Tuner in Training
    Join Date
    Mar 2022
    Posts
    18
    Quote Originally Posted by Cringer View Post
    You heard it here first:
    https://youtu.be/FmdJOOUUqQg
    https://youtu.be/viLlBZVbeag

    Hats off to Verlon!
    Hats off to you Cringer, the new tool works flawlessly and really opened my eyes to how far off my EOIT really is on my 5.3 Tahoe with Chopacabra. Just a couple small tweaks and my idle and part throttle is so much better. The best part is the smell at idle is almost completely gone.

  3. #43
    Advanced Tuner Cringer's Avatar
    Join Date
    Aug 2021
    Location
    Somewhere smoothing your VVE table
    Posts
    896
    Quote Originally Posted by Tech1340 View Post
    Hats off to you Cringer, the new tool works flawlessly and really opened my eyes to how far off my EOIT really is on my 5.3 Tahoe with Chopacabra. Just a couple small tweaks and my idle and part throttle is so much better. The best part is the smell at idle is almost completely gone.
    That is great to hear! Do you happen to have the cam specs with valve timing events for that cam?
    A standard approach will give you standard results.

    My Tuning Software:

    VVE Assistant [update for v1.5]
    MAF Assistant
    EOIT Assistant

  4. #44
    Tuner Balakayt.'s Avatar
    Join Date
    Jul 2024
    Location
    DFW, Texas
    Posts
    58
    What are yall using for filter on the EOIT PE histogram?

  5. #45
    Advanced Tuner Cringer's Avatar
    Join Date
    Aug 2021
    Location
    Somewhere smoothing your VVE table
    Posts
    896
    Quote Originally Posted by Balakayt. View Post
    What are yall using for filter on the EOIT PE histogram?
    Logging IPW? I just use where Commanded EQ < 1.0 for PE. And Commanded EQ = 1.0 for CL.
    A standard approach will give you standard results.

    My Tuning Software:

    VVE Assistant [update for v1.5]
    MAF Assistant
    EOIT Assistant

  6. #46
    Tuner Balakayt.'s Avatar
    Join Date
    Jul 2024
    Location
    DFW, Texas
    Posts
    58
    Quote Originally Posted by Cringer View Post
    Logging IPW? I just use where Commanded EQ < 1.0 for PE. And Commanded EQ = 1.0 for CL.
    Perfect. I assumed that was what i needed but just wanted to make sure. i started second guessing myself. thanks.

  7. #47
    Tuner in Training
    Join Date
    Mar 2022
    Posts
    18
    Quote Originally Posted by Cringer View Post
    That is great to hear! Do you happen to have the cam specs with valve timing events for that cam?
    It's similar to Truck Norris. I have the specs @ .050 and used the calculator you provided to find the following @ .006. I did have to round to the next degree up because they all calculated as half degrees.

    EVO:68
    EVC:28
    IVO:28
    IVC:60

  8. #48
    Tuner
    Join Date
    Mar 2022
    Location
    Olathe Ks
    Posts
    118
    What did you actually end up with your EOIT Table ???

  9. #49
    Tuner in Training
    Join Date
    Sep 2024
    Location
    East Tennessee
    Posts
    10
    I have not ran the truck since cringers suggested settings I?ll update in the future.

  10. #50
    Tuner in Training
    Join Date
    Aug 2024
    Location
    IA
    Posts
    48
    Thanks for the work on this, Cringer and Verlon! Excited to learn about this and give it a shot. Also, LOL at the "So you bought a Truck Norris cam?" button in the EOIT tool

  11. #51
    Tuner in Training
    Join Date
    Sep 2024
    Location
    East Tennessee
    Posts
    10
    truck ran good wit the new tune cringer unfortunately I think my ecm is also fried{like my tcm} got the new tcm in and programed fired up the truck and when everything started getting up to temp it freaked out and lost communications to all modules and died cleared codes and fired it back up and it dies in reduced engine power. has anyone else expirenced a dead e38 but only when it warms up

  12. #52
    Tuner in Training
    Join Date
    Sep 2024
    Location
    East Tennessee
    Posts
    10
    in a slump right now guys the build has been tough on me and ive been so excited to learn to tune but all these setbacks killing me thanks for the help on EOIT cringer your settings definitely cleans up the smell

  13. #53
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,265
    May be odd but ive seen people put the wrong battery on with the terminals opposite and the positive hitting a ground on the firewall killing several electronics.

  14. #54
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,265
    Another recent one was a shorted transfer case actuator.

  15. #55
    Tuner in Training
    Join Date
    Sep 2024
    Location
    East Tennessee
    Posts
    10
    definitely i was installing my dipstick and accidently hit the starter bending it for headers... it is a headache i hope the ecm is my last to replace

  16. #56
    Senior Tuner 04silverado6.0's Avatar
    Join Date
    Sep 2021
    Location
    Kentucky
    Posts
    1,265
    I did just arc a whole side of an exhaust on a starter. Luckily all is good with the car. Good lesson ill never forget.